Concord SLEEPER 2.0 INSTRUCTION MANUAL - Manual (Page 8)

29 28
In the reclining position, CONCORD SLEEPER must be fitted
cross-wise on the back seats.
Decide on which seats after reading the section on
“Choosing where to install the safety seat”.
Choosing the correct place for the safety seat in the car
can reduce the risk of injury to your baby in the event of an
accident.
The safety carrycot should be installed on the back seat
and in a sideways position. CONCORD SLEEPER takes
up two seats, you can choose between one side and the
central seat, thereby allowing an adult to travel alongside, or
completely centred. If you decide on the side central seat,
position the CONCORD SLEEPER so that the head part is as
far away as possible from the door.
If you have not lowered the backrest to the lying down
position, the incorrect installation safety device ( 13 ) will not
allow you to insert the belt into the fastener.
_ inSTAlling yOUr CArryCOT in THE CAr _ CHOOSing wHErE TO inSTAll THE SAFETy SEAT