Sony SLV-M20HF - Manual (Page 16)

Basic Operations
16
Setting the timer manually (continued)
2
Set the date, start and stop times, channel
number and tape speed:
1 Push the cursor stick to / to highlight
each item in turn.
2 Push the cursor stick to ./> to set each
item.
To correct a setting, push the cursor stick
to ? to return to that setting and reset.
To record the same program every day or the same day every week,
push the cursor stick to . while the date is highlighting. For
details, see “Daily/weekly recording” on the next page.
To record from a source connected to the LINE–1 IN or LINE–2 IN
jacks, press INPUT SELECT to display “LINE1” or “LINE2” in the
“CH” position.
3
Push the cursor stick to / to confirm the setting.
The cursor appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4
Press the cursor stick (OK).
5
Press POWER to turn off the VCR.
The indicator appears in the display window and the VCR
stands by for recording.
When using a cable box, leave it on.
INPUT
SELECT
• POWER
• CURSOR
PUSH OK
• CURSOR
PUSH OK
• CURSOR
PUSH OK
11
TIMER SET / CHECK
1
MON 11 / 16
DATE START STOP CH
/ – : – – – : – – – – EP
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
WED 8