Dell Alienware Aurora-R2 - Manual (Page 44)

044
044
/
CHAPTER 8: FANS
1
2
3
1 PCI-fan assembly cable 2 PCI-fan assembly
3 tabs (2)
Removing the PCI-Fan Assembly
Follow the instructions in “Before You Begin” on page 1. 6.
Remove the left side-panel (see “Removing the Left Side-Panel“ on page 2. 11).
Open the PCI shroud (see “Opening the PCI Shroud” on page 3. 18).
Remove the drive-bay shroud (see “Removing the Drive-Bay Shroud” on 4.
page 19).
Remove full-length PCI-Express cards, if any (see “Removing the PCI-Express
5.
Card(s)” on page 32).
Disconnect the PCI-fan assembly cable from the connector on the master
6.
I/O board.
Press the tabs and lift the PCI-fan assembly out of the chassis.
7.