Dell OptiPlex 160 - Manual (Page 2)

Removing the Chassis From the Wall Bracket
____________________
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
Mount the chassis onto the wall bracket till it
clicks into place.
WARNING:
Chassis front face should
not be placed in the up or down position.
1 wall bracket
mounted to
the wall
2 chassis mouting
plate pre-attached
to the chassis
1 tab 2 chassis
2
1
1
2