Electrolux EDC3250 - Manual (Page 15)

- 15 -
Installation
Positioning
You can install this dryer in a number of different ways.
We will show you the most suitable of these. Whichever
way you install it, here are some points to bear in mind:
● Always ensure that the dryer is level for optimum
functioning.
● The temperature in the room should not exceed
+35° C when the dryer is operating. If it does,
open a door or window while the dryer is on. The
dryer uses the air in the room for cooling.
● The area around the dryer should be as dust-free
as possible.
● If you install the dryer with its door hinge side
towards a wall, or next to a cupboard or wall unit
which is more than 370 mm deep, you will need
to leave a space on the hinge side at least 30 mm
wide. This is to allow the door to open wide enough
for removing the water tank.
● Ensure the air ducts are not obstructed.
● The dryer must not be installed above a bath or
in a shower area.
The adjustable feet must not be removed,
they ensure that there is adequate ventilation
underneath the dryer.
Electrical supply
The dryer is supplied with a lead and electrical plug for
connection to an earthed wall socket 230 V 10 A.
If the dryer is installed in a bathroom without
fixed wiring to the electrical supply, an earth
leakage circuit breaker (or RCD) must be
used.
Permanent electrical installation must be
carried out by an authorized electrician.