Philips HB311 User Manual

Page 7

Example

Suppose you take a 10-day tanning course, with a 10-minute session on the first day and a 25-minute session on the nine following days.
The entire course will then last (1 x 10 minutes) + (9 x 25 minutes) = 235 minutes.
This means you can take 7 of these courses in a year, as 7 x 235 minutes = 1645 minutes.

As is shown in the table, the first session of a tanning course should always last 10 minutes, irrespective of the sensitivity of the skin.

If you think that the sessions are too long for you (e.g. because your skin feels taut and tender after the session), we advise you to reduce the length
of the sessions by e.g. 5 minutes.

For a beautiful, even tan, turn your face and body to the left and right from time to time during the session so that the sides of the face and body
are equally exposed.

Using the appliance

Place the appliance on a solid, flat and stable surface.

Fully unwind the mains cord.

Put the plug in the wall socket.

Consult the table (see the chapter 'Tanning sessions: how often and how long?') to determine the appropriate duration of the session.

Put on the protective goggles provided.

Position yourself in front of the appliance.

◗

During tanning, the distance between the lamps and the part of the body to be tanned must be at least 10 cm (fig.2).

Always unplug the appliance after use.

Keep track of the number of sessions you have had by means of the memory knobs.

The appliance has four memory knobs for four persons.

You can set a new time before the set time has elapsed if you want a longer tanning session or if you want to tan more parts of your body
successively.The appliance does not need to cool down first.

Cleaning

Always unplug the appliance and let it cool down before cleaning it.

Clean the outside of the appliance with a damp cloth. Do not let any water run into the appliance.

Never use abrasive liquids such as scouring agents, petrol or acetone to clean the appliance.

Storage

Always unplug the appliance and let it cool down before storing it.

You can wind the cord round the hooks on the back of the appliance.

Replacement

The light emitted by the tanning lamps will become less bright in time. When this happens, you will notice a decrease in the tanning capacity of
the appliance.You can solve this problem by setting a slightly longer tanning time or by replacing the tanning lamps.

Always have the tube lamps and starters replaced by an authorised Philips dealer or service centre. Only they have the knowledge and skills
required for this job and the original spare parts for the appliance.

ENGLISH

For persons with less

sensitive skin

10 minutes

30 - 40 minutes

For persons with normal

sensitive skin

10 minutes

20 - 25 minutes

For persons with very

sensitive skin

10 minutes

10 - 15 minutes

Duration of the tanning session for each separately

treated part of the body

1st session

rest of at least 48 hours

2nd session

3rd session

4th session

5th session

6th session

7th session

8th session

9th session

10th session