Bosch GSH 11 VC Professional - Manual (Page 9)

English | 9
Bosch Power Tools 1 609 929 X73 | (28.2.12)
Delivery Scope
Demolition hammer, auxiliary handle.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for chiselling work in concrete, brick,
masonry and asphalt as well as for driving in and compacting,
when using the respective accessories.
Technical Data
The technical data of the machine are listed in the table on
page 120.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 105 dB(A).
Conformity assessment procedure according to Annex VI.
Equipment category: 10
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Technical file (2006/42/EC, 2000/14/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
29.09.2011
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 120.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
Wear ear protection.
Wear safety glasses/goggles
Movement direction
Reaction direction
Next step of action
Chiselling
Low impact rate
High impact rate
Switching On
Switching Off
Vario-Lock
Tool holder
Apply a light coat of grease to the shank
end of the application tool
Service Indicator
P
1
Rated power input
n
S
Impact rate
E Impact energy per stroke according to
EPTA-Procedure 05/2009
Weight according to EPTA-Procedure
01/2003
Protection class
L
wA
Sound power level
L
pA
Sound pressure level
K Uncertainty
a
h
Vibration total value
Symbol Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
OBJ_BUCH-1391-001.book Page 9 Tuesday, February 28, 2012 9:18 AM