Bosch GAS 20 L SFC Professional - Manual (Page 11)

English | 11
Bosch Power Tools 1 609 92A 085 | (28.2.13)
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
The vacuum cleaner has a blower function, e. g. for drying sur-
faces.
The vacuum cleaner has a socket outlet with remote automat-
ic switching for connection of a power tool with extraction
function.
The vacuum cleaner may generally not be used in rooms
where the danger of an explosion exists.
Technical Data
The technical data of the machine are listed in the table on
page 168.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” is in conformity with the fol-
lowing standards or standardization documents: EN 60335
and the directives 2011/65/EU, 2006/42/EC,
2004/108/EC including their amendments.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 01.03.2013
Noise Information
The measured values of the machine are listed in the table on
page 168.
Measured sound values determined according to EN 60704.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the vacuum cleaner. The instructions for each
action objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe
the safety instructions.
Dr. Egbert Schneider
Senior Vice President
Engineering Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action Figure Please observe Page
Removing accessories 1 169
Mounting the hose holder 2 169
Inserting a dust bag 3 170
Inserting a disposal bag 4 171
OBJ_BUCH-1321-005.book Page 11 Thursday, February 28, 2013 12:57 PM