Bosch GWS 780 C Professional - Manual (Page 16)

16 | English
1 609 92A 0EK | (22.8.13) Bosch Power Tools
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action Figure Please observe Page
Grinding, preparation 1 247 –248
Cutting, preparation 2 249 – 250
Cutting stone, brick and tiles,
preparation (recommendation) 3 251 – 252
Removing paint, preparation 4 253
Removing rust, preparation 5 254
Drilling tiles, preparation 6 255
Mounting the quick-clamping
nut 7 255 – 256
30°
OBJ_BUCH-161-007.book Page 16 Thursday, August 22, 2013 3:50 PM