Bosch AHS 52 LI - Manual (Page 25)

English | 25
Bosch Power Tools F 016 L70 729 | (13.12.10)
Maintenance and Service
Maintenance and Cleaning
f Warning: Before any work on the machine
itself, remove the battery from the ma-
chine.
Note: To ensure long and reliable service, carry
out the following maintenance regularly.
Regularly check for obvious defects such as
loose fixings, and worn or damaged compo-
nents.
Check that covers and guards are undamaged
and correctly fitted. Carry out necessary mainte-
nance or repairs before using.
If the garden product should happen to fail de-
spite the care taken in manufacture and testing,
repair should be carried out by an authorised
customer service agent for Bosch garden prod-
ucts.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the garden
product.
After Use/Storage
f Warning: Switch the machine off and re-
move the battery. Ensure battery is re-
moved before storage.
Clean the exterior of the machine thoroughly us-
ing a soft brush and cloth. Do not use water, sol-
vents or polishes. Remove all debris, especially
from the ventilation slots 7 of the motor.
Cutting time per bat-
tery charge too low Too much friction, due to lack of lu-
bricant Apply lubricant spray
Blade needs cleaning Clean blade
Poor cutting technique see “Working Advice”
Battery not fully charged Recharge battery; also see “Battery
Charging”
Continuous lighting
of the battery
charge indicator 10
No charging proce-
dure possible Battery not (properly) inserted Properly insert battery into battery
charger
Battery contacts contaminated Clean the battery contacts (e.g. by
inserting and removing the battery
several times) or replace the battery
Battery defective Replace the battery
The blades are run-
ning slow or the anti
blocking feature is
not functioning Battery discharged Recharge battery; also see “Battery
Charging”
Battery stored outside of battery
temperature Allow battery to warm naturally to
room temperature (within battery
operating temperature 0 – 45 °C)
Battery charge indi-
cator 10 does not
light up Mains plug of battery charger not
plugged in (properly) Insert mains plug (fully) into the
socket outlet
Socket outlet, mains cable or battery
charger defective Check the mains voltage; have the
battery charger checked by an au-
thorised after-sales service agent for
Bosch power tools
Problem Possible Cause Corrective Action
OBJ_BUCH-564-006.book Page 25 Monday, December 13, 2010 12:55 PM