Bosch AHS 550-24 ST - Manual (Page 10)

English - 2
The product is intended for cutting and trimming
hedges and bushes in domestic use.
This manual gives instructions on the correct as-
sembly and safe use of your hedgecutter. It is impor-
tant that you read these instructions carefully.
Carefully remove the machine from its packaging
and check for complete contents:
– Hedgecutter
– Blade guard
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
1 Cutting blade
2 Front handle guard
3 Front handle switch levers
4 Ventilation slots
5 Rear handle with switch lever
6 Mains plug**
7 Blade guard
8 Serial Number
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230
V AC, 50 Hz (for non-EU countries 220 V,
240 V as applicable). Only use approved extension
cables. Contact your Bosch Service Centre for de-
tails.
Extension cords/leads should only be used if they
comply with H05VV-F or H05RN-F types.
Product Specification
Hedgecutter AHS 400 - 24T AHS 480 - 24T AHS 550 - 24ST AHS 600 - 24ST
Part number 3 600 H48 0.. 3 600 H48 1.. 3 600 H48 2.. 3 600 H48 3..
Rated power 550 W 550 W 600 W 600 W
No-load stroke rate 1400 spm 1400 spm 1400 spm 1400 spm
Blade spacing 24 mm 24 mm 24 mm 24 mm
Cutting length 400 mm 480 mm 550 mm 600 mm
Weight 3.95 kg 4.05 kg 4.1 kg 4.2 kg
Protection class / II / II / II / II
Hedgecutter AHS 650 - 24ST AHS 6000 PRO-T AHS 7000 PRO-T
Part number 3 600 H48 4.. 3 600 H48 A.. 3 600 H48 B..
Rated power 600 W 700 W 700 W
No-load stroke rate 1400 spm 1500 spm 1500 spm
Blade spacing 24 mm 34 mm 34 mm
Cutting length 650 mm 600 mm 700 mm
Weight 4.25 kg 4.1 kg 4.2 kg
Protection class / II / II / II
Intended Use
Introduction
Delivered Items
Operating Controls
For Your Safety
Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
The blades continue to move for a few frac-
tions of a seconds after the hedgecutter is
switched off. Caution! Do not touch the mov-
ing blades.
F016 L70 366 - Buch Seite 2 Freitag, 23. September 2005 11:14 11
10 • F016 L70 366 • 05.09