Garmin GPS II Plus - Manual (Page 40)

Fig. 34a
Fig. 34b
34
Waypoint Definition Page
The waypoint definition page lets you create new waypoints manually or review
and edit an existing waypoint’s coordinates, symbols, and comments. It is also used
to delete an individual waypoint from memory (see p. 38). To create a new waypoint
manually, you’ll need to know its position coordinates or its approximate distance
and bearing from an existing waypoint.
To create a waypoint by entering coordinates:
1. From the waypoint definition page, highlight ‘NEW?’ (Fig. 34a), and press ENTER.
2. Enter a waypoint name, and press ENTER.
3. Press ENTER to select a waypoint symbol, make your selection, and press ENTER.
4. Highlight the ‘DONE?’ prompt, and press ENTER to return to the waypoint page.
5. Highlight the ‘position’ field, enter your position (Fig. 34b), and press ENTER.
6. Press ENTER to confirm the ‘DONE’ prompt.
gps ii + Mon (final?) 2/9/98 4:24 PM Page 34