Garmin nuvi 2370LT - Manual (Page 4)

4 nüvi 2300 Series Quick Start Manual
Connecting the Device to
Vehicle Power
‹
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to extreme
heat, remove the device from the
vehicle when exiting or store it out of
direct sunlight.
Charge your device before using it on
battery power.
1. Plug the vehicle power cable
➊
into the vehicle power cable port
➋
on the mount.
➋
➊
2. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
3. If you are using a traffic receiver
in Europe, connect the external
antenna to the traffic receiver and
secure it to the windshield using
the suction cups.
After the device has been connected
to vehicle power, the following
occurs.
• The device turns on.
• The device acquires satellite
signals. When at least one of
the bars is green, your
device has acquired satellite
signals.
NOTE: The device may need
a clear view of the sky to
acquire satellite signals.
• The device charges as you
drive. in the status bar
indicates the status of the
internal battery.