Garmin Montana 650t - Manual (Page 10)

10 Montana 600 Series Quick Start Manual
navigating to a Destination
You can navigate to a destination using
the map or compass.
1. Select Where To?.
2. Select a category.
3. Select a destination.
4. Select Go.
The map page opens with your route
marked with a magenta line.
5. Navigate using the map ( page 10 ) or
compass ( page 10 ).
Using the Map
1. Select Map.
The position icon represents your
location on the map. As you travel,
the position icon moves.
2. Complete one or more actions:
• Drag the map to view different
areas.
• Select + and - to zoom in and out
of the map.
• Select a location on the map,
and select the information bar
at the top of the screen to view
information about the selected
location (represented by a pin).
TIP: To customize the map view,
select > Setup Map, and adjust the
settings.
navigating with the Bearing
Pointer
When navigating to a destination,
the bearing pointer points to your
destination, regardless of the direction
you are moving.
1. Begin navigation to a destination
( page 10 ).
2. Select Compass.
3. Turn until points toward the top of
the compass, and continue moving in
that direction to the destination.