Garmin Mobile PC - Manual (Page 5)

Garmin Mobile PC with Wireless GPS Receiver Quick Start Manual
NOte: If you are using an ultra-mobile PC (UMPC)
or tablet PC, see your device documentation for
instructions on how to install software.
1. Insert the Garmin Mobile PC DVD-ROM into the
DVD-ROM drive on your laptop.
2. When prompted to install the Garmin Mobile
PC navigation software, click Next . Follow the
instructions on the installation wizard to finish
installing the navigation software on your laptop.
➍ Setting up Garmin Mobile PC
NOte: Install Garmin Mobile PC before establishing
a Bluetooth connection with your laptop.
1. Press and hold the Power button on the GPS 10x
receiver to turn on the GPS receiver.
2. Ensure that the GPS 10x receiver is within 30 feet
(10 meters) of your laptop.
3. Turn on your laptop and enable the Bluetooth
component. (Refer to your laptop documentation
for specific instructions about enabling Bluetooth
wireless technology.)
4. Open Garmin Mobile PC, found in the programs
folder or main menu on your laptop. The first time
you open Garmin Mobile PC, it automatically
searches for the GPS 10x receiver.
After your laptop and the GPS 10x receiver have
established a connection, the blue LED on the receiver
begins blinking slowly.
If the GPS 10x receiver has not established a
Bluetooth connection after several minutes, it turns off
automatically. To manually turn the GPS 10x receiver
off, press and hold the Power button.
Bluetooth LED Status
Rapid Flashing Blue: power is on, Bluetooth is on
Slow Flashing Blue: A Bluetooth link to your laptop
is established
Power LED Status
Flashing Yellow Green: charging is in progress
Solid Yellow Green: the battery is charged
Flashing Orange: low battery
•
•
•
•
•