Garmin nuvi 780 - Manual (Page 9)

nüvi 700 Series Owner’s Manual
G
ettinG
S
tarted
Step 1: Mount the nüvi
1. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the
suction cup with a lint-free cloth. Remove
the clear plastic from the suction cup.
Place the suction cup on the windshield.
4. Flip the lever back, toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt the nüvi back until it snaps into place.
7. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and your vehicle is running.
8. If you are using a traffic receiver in
Europe, secure the traffic receiver’s
antenna to the windshield using the
suction cups. (The traffic receiver is included in some nüvi 710, 750T, 760, and
770 packages.)
Cradle
Power cable
Suction cup mount