Garmin GPSMAP 546s - Manual

Finding a Marine Service and Navigating to It
To begin navigating:
1. From the Home screen, select Where To? .
2. Select a category.
3. Select a destination.
4. Select
Navigate To .
5. Select Go To .
OR
Select Guide To when using a
preprogrammed BlueChart ® g2 Vision ® card
to use Automatic Guidance.
6. Follow the colored line on the screen to the
destination.
To stop navigating:
From the navigation chart, press MENU ,
and select Stop Navigating .
Searching for a Destination by Name
1. From the Home screen, select Where To? > Search by Name .
2. Use the Rocker to select characters and spell at least a portion of the name of your
destination.
3. Press SELECT to view the 50 nearest destinations that contain your search criteria.
To go to the location, select the location > Navigate To > Go To .
Enter the Name View the Search
Results
Marking a Waypoint or Man Overboard (MOB)
To mark your current location as a waypoint or as an MOB:
1. From any screen, press MARK .
2. Select Back to save the waypoint, or select Man Overboard to designate the waypoint as
an MOB point.
To create a new waypoint:
1. From the Home screen, select Charts > Navigation Chart .
2. Use the map pointer ( ) to select the location you want to
designate as a waypoint.
3. Press SELECT .
4. Select Create Waypoint .
To move the waypoint on the Navigation chart:
1. Use the map pointer ( ) to highlight the waypoint on the
Navigation chart and press SELECT .
2. Select Review . (The Review button is only shown when more than
one waypoint is in the vicinity.)
3. Select the button for the waypoint you want to edit > Move .
4. Press SELECT to save the new location.
To edit an existing waypoint:
1. From the Home screen, select Information > User Data > Waypoints .
2. Select the waypoint you want to edit.
3. Select
Edit Waypoint .
4. Select the waypoint attribute you want to change ( Name , Symbol , Depth , Water Temp ,
Comment , or Position ).
To delete a waypoint or an MOB:
1. From the Navigation chart, use the map pointer ( ) to highlight the waypoint or the MOB
on the Navigation chart.
OR
From the Home screen, select Information > User Data > Waypoints .
2. Select the waypoint or the MOB you want to delete.
3. Select
Review > Delete (The Review button is only shown when more than one waypoint
is in the vicinity.)
Editing or Deleting a Waypoint
Create a Waypoint
GPSMAP
®
400/500 series
quick reference guide