Proximity waypoints – Garmin GPSMAP 3205 User Manual

Page 26

GPSMAP 3205 Owner’s Manual

asIc

PeratIon

evIewIng

and

dItIng

aYPoInts

3. Press

ENTER to review the highlighted waypoint on the Review Waypoint

Page.

4. Press the

Next soft key to return to the waypoint list. The next waypoint in

the list is automatically highlighted.

Deleting Waypoints

The following soft keys are available when you highlight a waypoint on the User

sub tab:

•

New Waypoint—creates a new waypoint.

• Delete—deletes the selected waypoint from the list and any route in which

the waypoint was used.

• Del by Smbl—deletes waypoints that use the same symbol.
• Delete All—deletes all waypoints from the unit.

NOTE: When you delete a waypoint from the list, it cannot be recovered from

the unit. Save important waypoints to a data card, or write them down.

To delete a single waypoint from the User sub tab:

1. Use the

ROCKER to highlight the waypoint you want to delete, and then

press the

Delete Waypoint soft key. A confirmation message appears.

2. Press the

OK soft key to delete the selected waypoint.

To delete waypoints by symbol:

1. On the

User sub tab, highlight the waypoint you want to delete.

2. Press the

Delete By Symbol soft key.

3. Use the

ROCKER to highlight the symbol of the waypoints you want to

delete, and press

ENTER.

4. Press the

OK soft key to delete the waypoints by symbol. Otherwise,

press the

Cancel soft key to return to the User sub tab without deleting

any waypoints.

To delete all user waypoints:

1. On the

User sub tab, press the Delete All soft key.

2. Highlight

OK, and press ENTER to delete all user waypoints.

Proximity Waypoints

Use the Proximity sub tab to define an alarm circle around a stored waypoint

location. The alarm circle can help you avoid reefs, rocks, or restricted waters.

You can add proximity alarms to a maximum of 10 waypoints or on-screen

map items, with a maximum alarm radius of 99.99 nautical or statute miles or

kilometers.
If a proximity alarm circle overlaps an existing alarm circle, the message

“Proximity Overlaps Another Proximity Waypoint” appears. Because the unit

only alerts for one of the overlap points, use caution when navigating in these

areas. If you enter a red proximity circle overlap, you are alerted only to the

closest proximity waypoint.

Proxmty crcle

Proxmty waypont