Garmin GVN 52 - Manual (Page 21)

GVN 52 Owner’s Manual 5
V
ieWinG the
M
aP and
U
SinG the
t
ooLS
GPS Info Page
Press the Menu button twice and select navigation >
gpS info to view GPS satellite information.
Sky vew
Satellte sgnal
strength bars
The sky view shows the satellites you are receiving. The
satellite signal strength bars indicate the strength of each
satellite you are receiving. A solid bar indicates the GPS
satellite is ready for use.
GPS Settings
Press Menu three times to open the Settings menu.
Select general > gpS . You can also access the GPS
Settings by selecting the gpS Settings button on the
GPS Info page.
Use indoors—select
Yes to turn the GPS receiver off.
Set position—set your position, if Use Indoors is
enabled. Select your location on the map and then select
oK .
WaaS/EgnoS—disable and enable WAAS/EGNOS.
WAAS and EGNOS are systems of satellites and ground
stations that provide GPS signal corrections, giving you
even better position accuracy. To learn about WAAS and
EGNOS, visit .