Olympus FL-600R - Manual (Page 5)

EN 7
Names of Parts (Fig. Names of Parts (Fig. p. 3) p. 3)
1 Wide panel 2 Light-emitting area
3 Remote sensor 4 AF illuminator/LED
window 5 Auto light receptor 6 Catch light
plate 7 Control panel 8 AUTO CHECK lamp
9
TEST button/CHARGE lamp 0 OK button
a Bounce lock release button b BACK LIGHT
button c ON/OFF button d Latch
e
Dial (a: fl ash compensation button; b: MODE
button; c: LED light button; d: ZOOM button)
Control Panel Control Panel (Fig. (Fig. p. p. 44 ))
X X Details Details ( ( p. p. 11, 18 11, 18 ))
1 Super FP fl ash 2 Flash control mode 3 Guide
number (GN) 4 Flash intensity control 5 Zoom
position (angle of illumination) 6 FOUR THIRDS
7
Zoom mode 8 LED light 9 ISO sensitivity
0 RC mode group a Aperture (F) b RC mode
channel c Temperature warning d Distance units
Continuous Firing Continuous Firing
The fl ash may become hot when fi red many
times in succession, resulting in damage
or malfunction. The fl ash should be fi red
no more than 10 times in succession
at intervals of 2.5 seconds, after which
it should be left unused for at least 10
minutes.
Preparing a Battery ( Preparing a Battery (Sold Separately Sold Separately))
Choose from the below batteries:
• AA (R6) alkaline batteries (× 4)
• AA (R6) NiMH batteries (× 4)
x
Note
AA (R6) manganese batteries cannot be
used.
Thank you for purchasing this Olympus product. To ensure your safety, please read this
instruction manual before use, and keep it handy for future reference.