AIPTEK Car Camcorder X3 - Manual (Page 6)

2
Operation
Installation suggestions
1. Be sure to place the device in an appropriate place, so as not to obstruct the
driver's view or deployment of air bags.
2. Use the Top 1/5 of the windshield.
3. Be sure the interior rear view mirror/viewing area mirror does not block the
camera.
Installation
1. Use Cigar Car Charger and connect USB terminal to the Car Camcorder power
connector.
2. Adjust the car recorder angle before placing it on the vehicle.
3. Sliding from right to left into the bracket until you hear a click.
Recommended installed location
To ensure proper startup operation, please use the supplied Cigar Car Charger
or Power Adapter (optional).
1. 3.