Setting datums using lock axis function, I – 3 t u rn ing specific oper ations – ACU-RITE VUE User Manual
Page 39
VUE
25
I – 3 T
u
rn
ing Specific Oper
ations
Setting Datums using LOCK AXIS Function
The Lock Axis function is useful for setting a datum when a tool is
under load, and the diameter of the workpiece is not known.
To use the Lock Axis function:
U
Press the DATUM hard key. The Cursor will be in the Datum
Number field.
U
Enter the datum number, and press the DOWN ARROW key to go
to the X axis field.
U
Turn a diameter in the X axis.
U
Press the LOCK AXIS soft key while the tool is still cutting.
U
Retract from the current position.
U
Turn the spindle off, and measure the workpiece diameter.
U
Enter the measured diameter, for example, 1.5”, and press ENTER.