beautypg.com

Miscellaneous questions – Acura 2012 ZDX Navigation User Manual

Page 216

background image

214

XX

Troubleshooting

X

Miscellaneous Questions

Troubl

eshootin

g

Miscellaneous Questions

Problem

Solution

My clock frequently changes forward and backward by
one hour.

The clock setting is automatically updated based on your GPS location. If you live and
work on the boundary between two time zones, you can turn off this feature.
2 Clock Adjustment P. 58

The clock changes even when I am not driving near a
time zone boundary.

The time zone boundaries are only approximated in the navigation system. Depending
on the geography of the time zone boundary, the switch to a different zone can be
erratic.
2 Clock Adjustment P. 58

My state does not observe daylight saving time. How
do I turn off this feature?

Press the INFO/PHONE button. Select Setup > Other > Clock Adjustment, and set
Auto Daylight to OFF.
2 Clock Adjustment P. 58

Daylight saving time has started, but the navigation
system did not change time even though Auto
Daylight is set to ON.

The automatic daylight saving time feature does not work in regions where the
daylight saving time system has not been adopted.

The navigation system automatic daylight time feature
is not switching the navigation system clock on the
correct dates.

Press the INFO/PHONE button. Select Setup > Other > Clock Adjustment, and set
Auto Daylight to ON. Note that the automatic daylight saving time feature does not
work in regions where the daylight saving time system has not been adopted.
2 Clock Adjustment P. 58

The navigation system clock switched by one hour for
no apparent reason.

You may be driving near a time zone boundary.
2 Clock Adjustment P. 58

My battery was disconnected or went dead, and the
navigation system is asking for a code.

Your vehicle comes with a card that included the 5-digit security code and serial
number. You should keep this card in a safe place outside your vehicle. If you cannot
find it, see your dealer.

How do I change the interface language?

Press the INFO/PHONE button. Select Setup > Other > Language, and set the
language to English, Français, or Español.

This manual is related to the following products: