Acura 2008 RDX - Manual (Page 73)

If this indicator blinks while driving,
it indicates the differential
temperature is too high. You will also see a ‘‘CHECK TIRE
PRESSURE’’ message on the multi-
information display (see page
). This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
This indicator has two functions:
If this happens, pull to the side of the
road when it is safe, check which tire
has lost pressure on the multi-
information display, and determine
the cause. If it is because of a flat tire,
have the flat tire repaired as soon as
possible. If two or more tires are
underinflated, call a professional
towing service. For more
information, see page
.
Check the tire pressure monitor on
the multi-information display and
determine the cause (see page
).
You will also see an ‘‘SH-AWD DIFF
TEMP HIGH’’ message on the multi-
information display (see page
).
Pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out. If
the indicator does not go out, take
your vehicle to a dealer to have it
checked.
For more information, see page .
If it comes on while driving, it
indicates that one or more of your
vehicle’s tires are significantly low
on pressure. 1.
78
301
77
308
391
CONTINUED
Low Tire Pressure/
TPMS Indicator
Instrument Panel Indicators
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
69
Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.
2008 RDX
Table Of Contents Main Menu