Actron AutoScanner® CP9575 - Manual (Page 5)

5
 ERASE key Performs the Erase Codes function and
scrolls forward through the screens. Press
this key when a down arrow () appears on
the display.
ENTER key Selects displayed items.
 BACK key Returns to the Main Menu or previous screen.
OBD II Connector Connects the Tool to the vehicle connector.
Icons
The following icons may appear on the display:

Indicates additional information is available on next
screen by using the  ERASE key.
 Indicates additional information is available on pre-
vious screen by using the  READ key.

Indicates a Pending DTC. For a definition of Pend-
ing DTC see page 6.
# of # Appears only when viewing codes. Indicates code
sequence and quantity (code # of n). For example,
if you see 2 of 9 you are looking at the 2nd of 9
codes reported by the computer module.
Mod $## Appears only when viewing codes. Indicates the
computer module that reported the code.
Indicates that the 
READ and ERASE hot keys
are active.
Connect the Tool
To connect the Tool to the vehicle:
1. Locate the OBD II connector under the steering column.
If the connector is not there, a label should be there indicating
the whereabouts of the connector. For more information on OBD
II connectors, go to http://www.obdclearinghouse.com/oemdb.
2. If necessary, remove the cover from the vehicle connector.
3. Turn the ignition switch to the ON position. Do not start the
engine.