Recorder m6000 operation – Acroprint ARES Express User Manual
Page 12

Recorder M6000 Operation:
It is a portable electronic device designed to "read" and store iButton serial numbers, along with the precise time and date of the readout. The unit is ca-
pable of downloading the stored recordings (5460, 64K) into any IBM or compatible PC, Pentium (100 MHz.) or higher processor. It is a sturdy device
capable of withstanding harsh environments and impacts. The unit is powered by a 3 AAA batteries.
The reader has a luminous indicator called LED (light emitting diode) and a Buzzer.
To install battery: Open the top of your reader by removing the 2 security screws and connect 3 AAA batteries, preferably alkaline. If the batteries are in
good shape the LED will emit 5
green blinks
with 5 beeps.
To make recordings: To make recordings of Recording Stations, ID Keys, Incident Booklets, (any iButtons) you need only to touch them with the
reader’s probe. If a correct recording is effected the reader will emit
1
green blink
with 2 (two) beeps.
Low battery: The M6000 recorder will signal a low battery status by emitting
1 red blink
with 2 (two) beeps. A brand new set of batteries will last for one
year or 600,000 recordings.
Full Memory: When the memory of your reader reaches “full” status (5460 recordings), each time you attempt a recording, the reader will emit
1 red blink
with 4 beeps
; this means your recorder is not reading anymore. For this case please make a full download of data to your PC and then erase the memory
to reset; now your reader will be ready for the next load cycle of 5460 new recordings.
M6000 Setup:
Time & Date Setup
1.
Insert your recorder M6000 into its download cradle.
2.
3.
4.
5.
2.
3.
4.
5.
2.
Select the
Recorders or Recordings
(either of the two) data Tabs.
Press the
Download / Program
button.
Select
Clock Setup
.
Your M6000 Time & Date and PC Time & Date will be synchronized.
Daylight Savings Setup:
1.
Insert your recorder M6000 into its download cradle.
Select the
Recorders or Recordings
(either of the two) data Tabs.
Press the
Download / Program
button.
Select
DST
Select
Day Light Savings Enabled.
The System will display default settings for the USA. If you desire to change DST settings, please use the pro-
vided calendar by a click on the drop list arrow.
How to Download Recordings:
1.
Insert your recorder M6000 into its download cradle.
Select the
Recorders or Recordings
(either of the two) data Tabs.
2.
Press the
Download / Program
button
3.
Select
Download
.
12