Pch 5121, 1 unpack the panel pc – Acnodes PCH 5121 User Manual

Page 14

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

PCH 5121

12.1” industrial Panel PC

1000-nit Sun light readable screen

IP67 rated fully enclosure

2.1 UNPACK THE PANEL PC

To unpack the flat panel PC, follow the steps below:

WARNING!

Only remove the protective plastic cover stuck to the front screen after installation. The plastic layer

protects the monitor surface during installation process.

Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.

Step 2: Open the outside box.

Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.

Step 4: Open the inside box.

Step 5: Lift the monitor out of the boxes.

Step 6: Remove the peripheral parts box from the main box.

2.2 PACKING LIST

1 x PCH5120/PCH5121
1 x Power Cable
6 x Connector Cap
1 x Panel mounting screws
1 x Touch Screen Pen

These optional items are also available.

1 x USB Cable

1 x Audio Cable

1 x LAN cable

1 x Power Adapter

1 x Serial port cable
1 x CAN bus cable