Acnodes PC 5173 - Manual (Page 31)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 5173
17” Industrial wireless Panel PC
The COM1 to COM5 Pin 9 Setting jumper locations are shown in Figure 4-3 below.
4.5.5 COM5 RS-232/422/485 SERIAL PORT SELECT JUMPER
Jumper Label:
UART_SEL1 and UART_SEL2
Jumper Type: 12-pin header and 8-pin header
Jumper Settings:See Table 4-5
Jumper Location: See Figure 4-4
The COM5 RS-232/422/485 Serial Port Select jumper sets the communication protocol
used by the second serial communications port (COM5) as RS-232, RS-422 or RS-
485. The COM5 RS-232/422/485 Serial Port Select settings are shown in Table 4-5.
The COM5 RS-232/422/485 Serial Port Select jumper location is shown in Figure 4-4.