1u rackmount c ombo cat6 kvm switch – Acnodes KC 802 User Manual
Page 2
14628 Central Ave,
Chino, CA 91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product descr
are subject to change without no
please visit Acnodes’ web site at
KC802/1
1U Rackmount C
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is
contents. The information in this document is subject to change without notice. We are not liable f
results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual
¦ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
¦ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-condition
temperatures not exceeding 40º Celsius (104º Fahrenheit).
¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally f
age to other equipment or injury to persons nearby.
¦ When the equipment is in an open position, do not cover, block or in any way obstruct the gap
power supply. Proper air convection is necessary to keep it from overheating.
¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be h
on the equipment’s ratings label.
¦ Observe all precautions and warnings attached to the equipment.
¦ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet t
aged by transient over-voltage.
¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spill
supply or on other hardware may cause damage, fire or electrical shock.
¦ Only qualified service personnel should open the chassis. Opening it yourself could damage th
date its warranty.
¦ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi
What the warranty does not cover
¦ Any product, on which the serial number has been defaced, modified or removed.
¦ Damage, deterioration or malfunction resulting from:
? Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized produ
failure to follow instructions supplied with the product.
? Repair or attempted repair by anyone not authorized by us.
? Any damage of the product due to shipment.
? Removal or installation of the product.
? Causes external to the product, such as electric power fluctuation or failure.
? Use of supplies or parts not meeting our specifications.
? Normal wear and tear.
? Any other causes which does not relate to a product defect.
¦ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, p
rules. These limits are designed to provide reasonable protection against harmful interference in
Any changes or modifications made to this equipment may void the user’s authority to operate thi
generates, uses, and can radiate radio frequency energy and, if not installed and used in accorda
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If t
harmful interference to radio or television reception, which can be determined by turning the equ
is encouraged to try to correct the interference by one or more of the following measures:
¦ Re-position or relocate the receiving antenna.
¦ Increase the separation between the equipment and receiver.
¦ Connect the equipment into an outlet on a circuit different from that to which the receiver is con