Acnodes PC 5152 - Manual (Page 42)

Chapter 4
Drivers Installation
4.1 S ystem
FPC5152 supports W indows 7 32-bit. To facilitate the installation of system driver,
please carefully read the instructions in this chapter before start installing.
Step 1 Insert Driver CD and select the “\Drivers”.
Step 2 Select all files and follow the installing procedure.
4.2 Touch Scre en
The FPC5152 uses the 5-wire analog resistve. There are the specification and driver
installation which are listed below.
 Specification
Touch Screen 5-wire Analog Resistive type
Touch Screen Controller
PenMount 6000 USB
Touch Screen Controller IC
Communications USB Interface
Baud Rate 19200 baud rate fixed
Resolution 1024 x 1024 (10 bit A/D converter inside)
Power Input 5V
Power Consumption Active: 24.6mA / Idle Mode: 13.4mA