Fes6831, Power management setup, Pnp/pci configurations – Acnodes FES 6831 User Manual
Page 32: Pc health status, Frequency/voltage control, Load fail-safe defaults, Load optimized defaults, Set supervisor/user password, Save and exit setup, Exit without saving
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
FES6831
Fanless Embedded Controller comes with
Intel Atom N270 1.6GHz Processor
Power Management Setup
Use this menu to specify your settings for power management. (HDD power down, power on by ring, KB
wake up, etc.)
PnP/PCI Configurations
This entry appears if your system supports PnP/PCI.
PC Health Status
This menu allows you to set the shutdown temperature for your system.
Frequency/Voltage Control
Use this menu to specify your settings for auto detect DIMM/PCI
clock and spread spectrum.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the minimal/stable performance for your system to oper-
ate.
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory settings for optimal performance system
operations. While AWARD has designated the custom BIOS to maximize performance, the factory has the
right to change these defaults to meet their needs.
Set Supervisor/User Password
Use this menu to set Supervisor/User Passwords.
Save and Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
You can refer to the "Acnodes BIOS Item Description.pdf" file in the CD for the
meaning of each setting in this chapter.