Acme BH05 - Manual (Page 3)

3
GB
If charging does not start, disconnect the charger, plug it again, and retry. Charging the
battery fully may take up to 2 hours.
2. When the battery is fully charged, the blue indicator light will turn off. Disconnect the
charger from the wall outlet and the headset.
When the battery is running out of power, the blue indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the Answer/end key for 4 seconds. The blue indicator light starts
to flash.
To switch off, press and hold the power key for 4 seconds until the blue indicator light is
displayed briefly.
Pair the headset with a compatible phone
1. Make sure your headset is turned off
2. Push the answer/end key for 7 seconds. The blue indicator light starts to flash.
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth
devices. See the user guide of your phone for instructions.
4. Select the headset (BH05) from the list of found devices.
5. Enter the password code 0000 to pair and connect the headset to your phone. In some
phones you may need to make the connection separately after pairing. See the user guide
of your phone for details. You only need to pair the headset with your phone once.
6. If the pairing is successful, the headset’s blue light will flash 2 times briefly for the first time
follow by a single flash every 5 seconds. The headset’s name appears in the phone menu
where you can view the currently paired Bluetooth devices.
Multipoint function
• In order to pair a second mobile phone, please press the volume down “s” button for 3
seconds, the LED will change rapidly, when it is steady Blue, the headset is ready for pairing
mode and you can pair the second mobile phone.
• Turn off the headset and turn it on again, both mobiles are ready to be linked.
• To activate the multipoint function, please press volume down “s” and volume up “r” at
the same time for 3 seconds, the headset will go into the multilink mode, the Blue LED will
show for 2 seconds.
• Press the volume up “r” button for 1.5 seconds to switch the calling between the two
phones. A short press of the power key will end the call, and in the meantime will connect
to the hold phone (some phones will ask if you want to connect the phone or not), pressing
the power key again will end the call.
Redial
Double-press the answer/end button and you can hear a beeping sound from the headset.
Release the button and the headset will dial the last dialled telephone number.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the phone to another
Bluetooth device) do one of the following:
· Switch off the headset.