Cleaning, Storage, Troubleshooting – Acme HD-310I User Manual
Page 10

10
GB
cleaning
1. Unplug the appliance before clean it.
2. Remove the attachments from the appliance before you clean them.
3. Clean the appliance with dry cloth.
4. Clean the attachments with wet cloth or wash it with water.
5. Wait until dry before you use or store them.
storage
1. Always unplug dryer after use.
2. Do not wind the mains cord round the appliance.
3. Allow the hair dryer to cool for 10 to 15 minutes before storing it.
troubleshooting
My dryer doesn’t work
• Check the socket to which dryer is connected. It is possible that socket is dead. Try to connect
another appliance to this socket to find out.
• If the dryer automatically switched itself off in drying process it may have overheated. Unplug
the dryer from power socket and let it cool down for a few minutes. Clean the holes and the
grilles of the dryer if it’s blocked by hair or something like that and try to switch on appliance
again.
• The power cord of the dryer can by damaged. Unplug the dryer from power socket and check it
carefully. If it is damaged, you must give it to replace by authorized service.