Acme GH200 - Manual (Page 7)

7
GB
3. Please unplug the power cord or shutdown the hob to separate it from the power system.
4. The infrared hob has a very high thermal efficiency and will create a high temperature at 600°C on the
surface when working. Minors and disable persons should not operate in order to prevent dangerous
circumstances. Please be sure that those not familiar with the hob to operate under your full guide or read
the manual carefully.
5. The hob must be placed on a clean, flat and fire safety surface for using. It is better to keep at least 10cm
from the wall and other objects beside it.
6. Please pick up the hob and move above the face if necessary. Don›t move it on the face by dragging. It is
possible to cause damage and scuffing. The breakage is not under the warranty owing to this.
7. The following circumstances are part of normal performance when the hob is in use.
• The heating zone of the surface will shine and shutdown continually when the surface temperature reaches
the set point value, but the temperature will keep constant.
• When regulating from high gear to low gear, the hob will be controlled by the left heating as the surplus
heating of the high gear. Therefore, the heating zone will not give off rays. The hob will heat according to the
temperature value of the low gear.
Attentions
1. Before use:
To prevent fire or shock, short-circuit, please note the following:
1) Please don’t open the stove, modify parts or repair the furnace by yourself.
2) When there is plug cord damage or if the power plug is not firmly inserted, please don’t use furnace.
3) Please don’t bend, bind the power cord or force it to avoid excessive damage.
4) Please don’t use any obstacles attached to this plug or power supply.
5) Please don’t touch power lines and plug with wet hands.
6) Please don’t use the far-infrared furnace when damp or near fire.