Acme GH200 - Manual (Page 6)

6
Breakdown code:
H1 Temperature sensor open circuit inside hob
H2 Environment temperature is higher than 85°C
E2 Environment temperature sensor open circuit
E3 Environment temperature sensor short circuit
E4 Heating 5 minutes short circuit alarm
Safety Tips
1. Overheating protection: if the hob appears to have overheated because of a breakdown or negligence.
2. The load weight of the surface shall not be over 10 kilograms.
3. Don’t unplug the power cord plug immediately after shutdown. Keep the fans operating to lower the
temperature inside. Please don’t block the air intakes when using.
This product is not suitable for children or disabled persons, to keep from danger.
Using knowledge
Please be sure to read this part of the contents and instructions carefully. So you can use the infrared hob
correctly and safely.
1. Please confirm if the model, output power of the used power socket match with the infrared hob’s. Also if
the voltage, current, power of the alternating power connected to the product meet the requirement of
the infrared hob.
2. Before you use the infrared hob for the first time, please clean the surface and wipe off the potential residue
due to the package on the hob surface. Also, please clean it after use, general cleaning is often done after
the hob has cooled. Please refer to the “method of maintain and clean” for details.
GB