2 frequently asked questions – Acme MP01 User Manual

Page 28

5.2 frequently asked Questions

Question 1. When I try to disconnect the USB device, I keep on getting “The

device ‘Generic volume’ cannot be stopped right now. Try stopping the device

again later.” message, what should I do?

Close any program that might be accessing data on the player, including Windows®

Explorer. If it does not work, close all programs and wait for another 20 seconds,

then try the green arrow icon again. If it still does not work, you should shut down the

player and disconnect the USB cable.

Question 2. I find new file names and folder names that I never created before

or they have strange gibberish names.

Most likely, the player’s file allocation table (FAT) has been corrupted. This might be

due to the player shutting down (due to low battery power) while reading or writing

to your computer by the USB connection. Windows and Macintosh often write extra

files to the hard disk such as finder.def or System volume info. These are normal and

will not do any harm to the player.

Question 3. I used my player to transfer files back and forth between different

computers. Will defragmenting the player hard disk do any harm to it?

Defragmenting the player hard disk may be useful after having transferred many files

to and from the player. It is never harmful to use the defragment on the player. Make

sure no other programs are running while using the Windows® defragment utility.

Make sure you have connected the player with the external power adapter during

this procedure.

Question 4. My files have disappeared from the player.

Make sure that you browse your files via the correct browser

mode which means

correct filtered views such as Photos, Music, or Movies.

Question 5. During power on, why does the TV will have a short flashing, blue

screen or screensaver?

This is normal, when the system initializes, it will setup the corresponding parameters

so it can output the correct video signal to the TV, during the initializing time, the TV

will receive incorrect signals or the signals will not be stable and will cause the TV

screen to flash, some TV’s will treat this as no signal, and will display a blue screen

or screensaver.