Candy PCV 604 C User Manual

Page 22

Scrubbing with steel cleaning wires may harm the vitroceramic glass surface. Formations of dust

on thesurface shouldbe cleanedup using a dampened cloth

Changes in colourwhich might occur on the ceramic glass surface do not affect the functional structure

or permanence of the vitroceramic. The reason for the changes in colour is not the change in the

material; it may be because the burnt residues on the surface are not cleaned up or the pots used

have worn the glass surface or because unsuitable cleaning materials were used

The cleaning spatula should always be used priortochemical cleaning substances. With this spatula,

youcan clean up the tiniest of dirts on the vitroceramic surface

Dirts that aredifficult to remove

such

as melted plastic, heavy oils, sweet substances, can be removed easily with the spatula. As the

spatula includes a razor, it is dangerous and must be kept out of reach of children

Duringcleaning with the spatula, pay attention not toscrape off the sillicon adhesives found on the sides

of the glass.

It is recommendedthat you leave this operationtotheAuthorisedService.

Unplugthe oven first and make sure that it is cold. After removing thelidinfront of the light, take the

bulbout. Insert the new bulbresistant to 300

C, whichyou

find atAuthorised Services, into the

place of the bulb you have removed. Thenfit the light protecting

back into its place. After that, your

oven will be ready foruse.

ENG

5.5 MAINTENANCE

Replacing the Oven Light Bulb

lid

will