Plantronics Savi W430 - Manual (Page 6)

Plantronics Savi User Guide 6
Note The product has a non-replaceable battery. Contact
Plantronics for replacement information.
2.3 Docking and charging headset
1 Gently push the headset into the charge cradle.
The charging indicator light on the charger base will flash
green to indicate that the headset battery is charging.
2 Charge for at least 20 minutes prior to the first use.
A full charge takes 3 hours. The indicator light will turn solid
green.
Charging
Indicator Light
CHArging TiME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
Note The USB charging cable can also be used to charge the
headset. To successfully charge your headset with the USB cable
the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other devices
drawing power from the PC’s USB port(s).
2 Set-up
2.1 Connecting USB adapter to PC
1 Insert the USB adapter into the USB port on the PC. The
indicator light on the USB adapter will be solid red to indicate
the USB adapter is powered on and will turn solid green when
it finds the headset.
Note The headset may have to be charged before the USB
adapter can find it.
2 the USB adapter can be folded as shown.
IMPoRtANt Note For best performance, it is recommended
that Windows is updated with Service Pack levels listed below:
Microsoft Windows® XP Service Pack 3 (SP3) or later
Microsoft Windows Vista® Service Pack 1 (SP1) or later
2.2 Connecting power supply to charger
base
1 Connect the base power supply into the power jack on
the charger base.
2 Connect the power supply to the outlet. The charging
indicator light will be solid green.