HONDA 2011 Accord Sedan - Manual (Page 46)

Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Other LATCH-compatible seats
have a flexible-type connector as
shown above. Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Open the anchor cover.
4.
5.
6.
95
7.
8.
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
43
ANCHOR Flexible type
ANCHOR
COVER
TETHER STRAP HOOK
10/06/18 15:47:27 31TA5630_048
2011 Accord Sedan