HONDA 2011 Accord Sedan - Manual (Page 371)

Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector onto
the bulb.
Put the inner fender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
the center.
Turn on the headlights to test the
new bulb.
Open the hood.
To change the turn signal bulb on
the passenger’s side, remove the
engine coolant reserve tank by
pulling it out of its stay.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
Remove the air intake duct (see
page
).
1.
2.
8.
7.
6.
9.
3.
366
Driver’s side on V6 models
Lights
Replacing a Front Turn Signal/
Parking Light Bulb
368
BULB
STAY V6 model is shown.
10/06/18 16:29:56 31TA5630_373
2011 Accord Sedan