HONDA 2012 Civic Coupe - Manual (Page 316)

315
uu Fuses u Inspecting and Changing Fuses
H
a
nd
ling
t
h
e Un
exp
e
cted
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK ( 0 . Turn
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1 Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
2 Circuit Protected and Amps for Each Fuse
P. 313
There is a fuse puller on the back of the engine
compartment fuse box cover.
Combined
Fuse
Blown Fuse
Fuse Puller
CIVIC 2D-31TS8600.book 315 ページ ２０１１年３月７日 月曜日 午後１時１０分
Home
QRG
Index
TOC
2012 Civic Coupe