HONDA 2012 Civic Coupe - Manual (Page 299)

uu If a Tire Goes Flat u Changing a Flat Tire
298
H
a
nd
ling
t
h
e Un
exp
e
cted
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
80 lbf∙ft (108 N∙m, 11 kgf∙m)
1. Remove the center cap.
2. Place the flat tire face down in the spare tire
well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing bolt.
4. Securely put the jack and wheel nut wrench
back in the tool case. Store the case in the
trunk.
■ Storing the Flat Tire 1 Storing the Flat Tire
3 WARNING
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Spacer
Cone
Wing
Bolt
For compact spare tire
For
normal
tire
Models with aluminum wheels
All models
CIVIC 2D-31TS8600.book 298 ページ ２０１１年３月７日 月曜日 午後１時１０分
Home
QRG
Index
TOC
2012 Civic Coupe