HONDA 2013 Odyssey Navigation - Manual (Page 134)

132
Au
d
io
Playing FM/AM Radio
Selecting FM/AM Mode
1. Press the AM/FM button.
 Press the AM/FM button again, if necessary, to select the frequency band (AM,
FM1, FM2).
2. Select a station using the buttons (Preset, SCAN), the bars (SKIP, CATEGORY), and
the TUNE knob.
 On the FM bands, you can also use the CATEGORY bar and TITLE button to
select a station provided by the Radio Data System (RDS).
 The band and frequency are displayed on the display.
Audio Screen Control
H AUDIO button (in FM/AM mode)
Control the audio system through the navigation screen.
1. Move e to select a frequency band
(AM, FM1, or FM2).
2. Rotate i to select a preset
station. Press u.
 Press and hold u until a beep
sounds to store the current
station in a preset button.
 Move r to select AUDIO
MENU.
2 Audio Menu P. 133
1 Playing FM/AM Radio
d “Display audio screen”
You can control the radio using voice control
commands.
2 Radio Commands P. 249
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
The ST indicator comes on the display for stereo
FM broadcasts. Stereo reproduction in AM is not
available.
The radio can receive the complete AM and FM
bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store six AM stations and 12 FM stations
in the preset buttons. FM1 and FM2 let you store
six stations each.
Stereo indicator Frequency band
Preset stations