HONDA 2011 Accord Coupe - Manual (Page 111)

To stop the system’s automatic
adjustment, do any of these actions:
Push any of the adjustment
switches for the seat.
Press any button on the driver’s
door: SET, memory button 1 or 2.
The system will move the driver’s
seat to the memorized position. The
indicator in the selected memory
button will flash during movement.
When the adjustment is complete,
you will hear two beeps, and the
indicator will stay on.
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete. Shift out of Park (automatic).
Release the parking brake
(manual).
If desired, you can use the
adjustment switches to change the
seat position after it is in its
memorized position. If you change
the memorized position, the
indicator in the memory button will
go out. To keep this seat position for
later use, you must store it in the
driver’s seat position memory.
On vehicles with manual transmission
Driving Position Memory System
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
105
10/07/12 16:20:50 31TE0630_110