HONDA 2011 Accord Coupe - Manual (Page 109)

Store a driving position only when
the vehicle is parked. Your vehicle has a memory feature
for the driver’s seat position.
Seat, except for power lumbar,
position can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2). Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
Press and release the SET button.
You will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current position of the driver’s
seat is now stored. Adjust the seat to a comfortable
position (see page
).
3.
1.
2.
93
CONTINUED
U.S. V6 models, and Canadian EX-L and
V6 models with navigation system Storing a Driving Position in
Memory
Driving Position Memory System
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
103
MEMORY BUTTONS
SET BUTTON
10/07/12 16:20:30 31TE0630_108