Does not start, P. 250, P250) – HONDA 2013 Fit User Manual
Page 251: Engine does not start, Checking the engine

250
Han
d
lin
g the U
n
expected
Engine Does Not Start
Checking the Engine
If the engine does not start, turn the ignition switch to START
(
e
and check the
starter.
Starter condition
Checklist
Starter doesn’t turn or turns
over slowly.
The battery may be dead. Check
each of the items on the right and
respond accordingly.
Check brightness of the interior light.
Turn on interior lights and check brightness.
●
If the interior lights are dim or do not come on at all
●
If the interior lights come on normally
2 Inspecting and Changing Fuses P. 263
The starter turns over normally
but the engine doesn’t start.
There may be a problem with the
fuse. Check each of the items on
the right and respond accordingly.
Review the engine start procedure.
Follow its instructions, and try to start the engine again.
Check the immobilizer system indicator.
When the immobilizer system indicator is blinking, the engine cannot be started.
Check the fuel level.
There should be enough fuel in the tank.
Check the fuse.
Check all fuses, or have the vehicle checked by a dealer.
2 Inspecting and Changing Fuses P. 263
If the problem continues:
1
Checking the Engine
If you must start the vehicle immediately, use an
assisting vehicle to jump start it.
2013 Fit
TOC
Home
QRG
Index