HONDA 2012 Accord Sedan - Manual (Page 47)

Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Move the seat belt buckle or
tongue away from the lower
anchors.
To install a LATCH-compatible child
seat: Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the outer
rear seats.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
The location of each lower anchor is
indicated by a small button above the
anchor point.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
1.
2.
3.
Installing a Child Seat
Installing a Child Seat
44
BUTTON
Rigid type LOWER ANCHORS
11/07/09 21:13:09 31TA5640_049
Dr
iv
er
and
P
asseng
er
Saf
e
ty
with LATCH
2012 Accord Sedan