Installing a child seat – HONDA 2013 Ridgeline User Manual
Page 54

Route the tether strap downward
properly, making sure the strap is
not twisted.
Attach the tether strap hook to the
outer tether anchor on the outside
of the seat bottom.
Make sure to attach the tether
strap hook to the anchor before
installing the child seat, because
the tether anchor is positioned
behind the child seat.
Place the child seat on the rear
seat.
Push down the rear center head
restraint to the lowest position.
Route the tether strap over the
seat-back, lift the cover, then hook
the tether strap through the upper
guide as shown.
Route the tether strap downward
properly along the seat- back,
making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
1.
2.
3.
4.
5.
3.
4.
CONTINUED
Installing a Child Seat
Using the Center Tether Anchor
49
UPPER GUIDE
CENTER TETHER ANCHOR
12/08/09 16:05:38 31SJC670_056
2013 Ridgeline
Dr
iv
er
and
P
asseng
er
Saf
e
ty