Pairing a phone, 2 pairing a phone, P. 140 – HONDA 2012 Fit Navigation User Manual
Page 141
140
Bluetooth® HandsFreeLink®
Pairing a Phone
Bl
ueto
oth
® H
a
nd
sF
reeLink®
Pairing a Phone
H PHONE button
When no Bluetooth-compatible phone has ever been paired to the system, the
following screen appears:
1. Select Yes.
2. Put your cell phone in “Discovery”
or “Search” mode.
3. Select OK.
The system begins to search for
your phone.
4. Select your phone in the list.
Select Find Another Phone if
your phone is not found.
Refer to your phone manual for
instructions on searching for a
Bluetooth® device.
5. Enter the 4-digit pairing code on
your phone when prompted to
complete the pairing process.
1
Pairing a Phone
Your Bluetooth-compatible phone must be
paired to HFL before you can make and receive
hands-free calls.
The maximum range between your phone and
vehicle is about 30 feet (10 meters).
Phone Pairing Tips
•
You cannot pair your phone while the vehicle
is moving.
•
Your phone must be in discovery or search
mode when pairing the phone. Refer to your
phone’s manual.
•
Up to six phones can be paired.
•
Your phone’s battery may drain faster when it
is paired to HFL.
•
If your phone is not ready for pairing or not
found by the system within three minutes, the
system will time out and returns to idle.
•
The default pairing code “0000” is used unless
you change the setting.
Pairing Code
You can change the pairing code setting.
2 Changing the Pairing Code P. 142
Delete a Phone
You can delete the paired phone.
2 Deleting a Paired Phone P. 143
FIT_KA-31TK6830.book 140 ページ 2011年7月4日
月曜日
午後2時45分
QRG
Index
Home
TOC
2012 Fit Navigation