Selecting usb mode – HONDA 2012 Fit Navigation User Manual
Page 129
128
Playing a USB Flash Drive
Selecting USB Mode
Au
dio
Selecting USB Mode
1. Connect the USB flash drive to the
USB adapter cable in the center
console.
2. Press the CD/AUX button until you
get to USB mode.
3. Select AUDIO/STREET until
AUDIO is highlighted in blue.
The audio information is
displayed at the bottom of the
screen.
4. Select
c or x to select a track.
You can also select a track using
the SEEK/SKIP button.
The current track number and
total number of tracks are
displayed.
1
Playing a USB Flash Drive
d “Display audio screen”
You can control the USB flash drive using voice
commands.
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
In some cases, the name of the artist, album, or
track may not appear correctly.
Tracks on the USB flash drive are played in their
stored order. This order may be different from
the order displayed on your PC or device.
The audio system displays Unplayable File, and
then skips to the next track when the following
tracks are played:
•
Tracks in WMA format protected by digital
rights management (DRM)
•
Tracks in unsupported format
If there is a problem, you may see an error
message on the display.
Audio control
FIT_KA-31TK6830.book 128 ページ ２０１１年７月４日
月曜日
午後２時４５分
QRG
Index
Home
TOC
2012 Fit Navigation